14. L modeling#
14.1. Characteristics of modeling#
A D_ PLAN modeling is used for solid elements with the GCP method for the treatment of CONTACT.
14.2. Characteristics of the mesh#
The same mesh is used as for modeling A.
Number of nodes: |
313 |
Number of meshes and types: |
265 QUAD4et 132 SEG2 |
14.3. Tested sizes and results#
Identification |
Reference Value |
Reference Type |
Tolerance |
SIYYau node \(\mathit{N14}\) |
—1.E+5 |
“ANALYTIQUE” |
2.13% |
SIYYau point \(A\) |
—1.E+5 |
“ANALYTIQUE” |
7.5% |
SIYYau point \(B\) |
—1.E+5 |
“ANALYTIQUE” |
7.5% |
DYau node \(\mathit{N14}\) |
-0.05 |
“ANALYTIQUE” |
2.13% |
DYau point \(A\) |
-0.05 |
“ANALYTIQUE” |
0.7% |
DYau point \(B\) |
-0.05 |
“ANALYTIQUE” |
0.7% |
14.4. notes#
Discreet formulations do not verify the patch-test unlike continuous formulation, which is why the tolerances are looser.