16. Q modeling#
16.1. Characteristics of modeling#
3D modeling is used for solid elements with method CONTINUE for the treatment of CONTACT. The contact surfaces facing each other are made up of QUAD9 elements.
16.2. Characteristics of the mesh#
Number of knots: |
850 |
Number of meshes and types: |
128 HEXA27et 64 QUAD9 |
16.3. Tested sizes and results#
Identification |
Reference Value |
Reference Type |
Tolerance |
LAGS_Cau node \(\mathit{A21}\) |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
LAGS_Cau point \(\mathit{A22}\) |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
LAGS_Cau point \(\mathit{A23}\) |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
LAGS_Cau point \(\mathit{A24}\) |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
MAX of LAGS_Csur the surface |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
MIN of LAGS_Csur the surface |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
DZau point \(\mathit{A21}\) |
-0.05 |
“ANALYTIQUE” |
0.1% |
DZau point \(\mathit{A22}\) |
-0.05 |
“ANALYTIQUE” |
0.1% |
DZau point \(\mathit{A23}\) |
-0.05 |
“ANALYTIQUE” |
0.1% |
DZau point \(\mathit{A24}\) |
-0.05 |
“ANALYTIQUE” |
0.1% |
16.4. notes#
In this modeling, we use HEXA27 meshes that have been transformed by the CREA_MAILLAGE operator.