7. E modeling#
7.1. Characteristics of modeling#
3D modeling is used for solid elements with method CONTINUE for the treatment of CONTACT. The contact surfaces facing each other are made up of TRIA6 elements.
7.2. Characteristics of the mesh#
Number of nodes: |
1010 |
Number of meshes and types: |
256 PENTA15et 128 TRIA6 |
7.3. Tested sizes and results#
Identification |
Reference Value |
Reference Type |
Tolerance |
LAGS_Cau node \(\mathit{A21}\) |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
LAGS_Cau point \(\mathit{A22}\) |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
LAGS_Cau point \(\mathit{A23}\) |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
LAGS_Cau point \(\mathit{A24}\) |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
DZau point \(\mathit{A21}\) |
-0.05 |
“ANALYTIQUE” |
0.1% |
DZau point \(\mathit{A22}\) |
-0.05 |
“ANALYTIQUE” |
0.1% |
DZau point \(\mathit{A23}\) |
-0.05 |
“ANALYTIQUE” |
0.1% |
DZau point \(\mathit{A24}\) |
-0.05 |
“ANALYTIQUE” |
0.1% |
MAX of LAGS_Csur the surface |
—1.E+5 |
“ANALYTIQUE” |
0.1% |
MIN of LAGS_Csur the surface |
—1.E+5 |
“ANALYTIQUE” |
0.1% |