9. G modeling#
9.1. Characteristics of modeling#
2 POU_D_EM elements for the tubular section.
The section is meshed in QUAD4: it is discretized by a mesh in the thickness, and 90 meshes on the circumference.
Single pull: |
(ECRO_LINE) |
Pure bending: |
without work hardening |
9.2. Characteristics of the mesh#
2 SEG2 meshes for the beam. 90 QUAD4 meshes for the section.
9.3. Tested sizes and results#
Traction:
\({\mathrm{DX}}_{(B)}\) |
Order Number |
Identification |
Identification |
Reference Type |
Tolerance |
|
\(2{\mathrm{DX}}^{e}\) |
11 |
N |
ANALYTIQUE |
|
|
|
\(3{\mathrm{DX}}^{e}\) |
21 |
N |
ANALYTIQUE |
|
|
Flexion:
\({\mathrm{DRZ}}_{(B)}\) |
Order Number |
Identification |
Identification |
Reference Type |
Tolerance |
|
\({\mathrm{DRZ}}^{e}\) |
1 |
|
|
|
|
|
\(5{\mathrm{DRZ}}^{e}\) |
21 |
|
|
|
|