G modeling
==============

Characteristics of modeling
-----------------------------------

2 POU_D_EM elements for the tubular section.

The section is meshed in QUAD4: it is discretized by a mesh in the thickness, and 90 meshes on the circumference.

.. csv-table::

    "Single pull:", "(ECRO_LINE)"
    "Pure bending:", "without work hardening"



Characteristics of the mesh
----------------------------

2 SEG2 meshes for the beam. 90 QUAD4 meshes for the section.


Tested sizes and results
------------------------------

Traction:

.. csv-table::

    ":math:`{\mathrm{DX}}_{(B)}` ", "**Order Number**", "**Identification**", "**Identification**", "**Reference Type**", "**Tolerance**"
    ":math:`2{\mathrm{DX}}^{e}` ", "11", "N", "ANALYTIQUE "," "," :math:`9.47E+04` "," :math:`0.10\text{\%}`"
    ":math:`3{\mathrm{DX}}^{e}` ", "21", "N", "ANALYTIQUE "," "," :math:`9.565E+04` "," :math:`0.10\text{\%}`"


Flexion:

.. csv-table::

    ":math:`{\mathrm{DRZ}}_{(B)}` ", "**Order Number**", "**Identification**", "**Identification**", "**Reference Type**", "**Tolerance**"
    ":math:`{\mathrm{DRZ}}^{e}` ", "1"," MFZ "," "," ANALYTIQUE "," :math:`4.642E+03` "," :math:`0.10\text{\%}`"
    ":math:`5{\mathrm{DRZ}}^{e}` ", "21"," MFZ "," "," ANALYTIQUE "," :math:`5.9106E+03` "," :math:`0.50\text{\%}`"