4. B modeling#
4.1. Characteristics of modeling#
The modeling is AXIS, the contact formulation is CONTINUE, the cases with and without friction are treated.
4.2. Characteristics of the mesh#
Number of knots: 2155
Number of meshes and types: 671 QUAD8.
4.3. Tested sizes and results#
First calculation (without friction)
Identification |
Reference type |
Reference value |
Tolerance |
\(\mathit{DY}\) at point \(M\) |
“SOURCE_EXTERNE” |
-0,13294119101090 |
0, 2% |
\(\mathit{SIYY}\) at point \(M\) |
“SOURCE_EXTERNE” |
-94,122096406847 |
|
Second calculation (with friction)
Identification |
Reference type |
Reference value |
Tolerance |
\(\mathit{DY}\) at point \(M\) |
“SOURCE_EXTERNE” |
-0,13079352874552 |
|
\(\mathit{SIYY}\) at point \(M\) |
“SOURCE_EXTERNE” |
-95.473963617887 |
0.08% |
4.4. notes#
The results on a quadratic mesh change very little compared to modeling A (linear mesh). They are still just as close to the references.