B modeling
==============


Characteristics of modeling
-----------------------------------

The modeling is AXIS, the contact formulation is CONTINUE, the cases with and without friction are treated.


Characteristics of the mesh
----------------------------


.. image:: images/100000000000045B00000304B2A9591DF32BA355.png
    :width: 2.7283in
    :height: 4.7445in


.. _RefImage_100000000000045B00000304B2A9591DF32BA355.png:

Number of knots: 2155

Number of meshes and types: 671 QUAD8.


Tested sizes and results
------------------------------

First calculation (without friction)


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    ":math:`\mathit{DY}` at point :math:`M` ", "'SOURCE_EXTERNE'", "-0,13294119101090", "0, 2%"
    ":math:`\mathit{SIYY}` at point :math:`M` ", "'SOURCE_EXTERNE'", "-94,122096406847"," 0.1%"


Second calculation (with friction)


.. csv-table::

    "**Identification**", "**Reference type**", "**Reference value**", "**Tolerance**"
    ":math:`\mathit{DY}` at point :math:`M` ", "'SOURCE_EXTERNE'", "-0,13079352874552"," 0.19%"
    ":math:`\mathit{SIYY}` at point :math:`M` ", "'SOURCE_EXTERNE'", "-95.473963617887", "0.08%"



notes
---------

The results on a quadratic mesh change very little compared to modeling A (linear mesh). They are still just as close to the references.