4. B modeling#
4.1. Characteristic of modeling#
The modeling used is two-dimensional. We use the elements D_ PLAN
4.2. Characteristics of the mesh#
The mesh consists of a linear quadrangular mesh (with 4 knots).
Figure 3: Modeling mesh \(B\)
4.3. Tested sizes and results#
VMIS_ISOT_LINE behavior with GDEF_LOG
Imposed displacement |
Size tested |
Reference \((\mathrm{MPa})\) |
Tolerance (%) |
\(\mathrm{500mm}\) |
|
1125 |
0.2 |
\(\mathrm{700mm}\) |
|
1411 |
0.2 |
\(\mathrm{900mm}\) |
|
1664 |
0.2 |
\(\mathrm{1100mm}\) |
|
1891.7 |
0.2 |