5. C modeling#
5.1. Characteristic of modeling#
The modeling is 3D, and simulates a state of plane stress. Here only traction, rotation, and new traction are considered.
5.2. Characteristics of the mesh#
The mesh consists of a linear hexahedral mesh (with 8 knots).
Figure 4: Meshing identical to that of modeling \(A\)
5.3. Tested sizes and results#
VMIS_ISOT_LINE behavior with GDEF_LOG
Imposed displacement |
Size tested |
Reference \((\mathit{MPa})\) |
Tolerance (%) |
\(500\mathit{mm}\) |
|
1019.57 |
2 |
\(500\mathit{mm}\) after rotation |
SIEQ_ELGA |
1019.57 |
2 |
\(700\mathit{mm}\) |
|
1271 |
2 |