B modeling
==============


Characteristic of modeling
----------------------------------

The modeling used is two-dimensional. We use the elements D_ PLAN


Characteristics of the mesh
----------------------------

The mesh consists of a linear quadrangular mesh (with 4 knots).


.. image:: images/100002000000014400000184DF255C78F94A1D72.png
    :width: 1.9689in
    :height: 2.3583in


.. _RefImage_100002000000014400000184DF255C78F94A1D72.png:

 Figure 3: Modeling mesh :math:`B`


Tested sizes and results
------------------------------

VMIS_ISOT_LINE behavior with GDEF_LOG


.. csv-table::

    "Imposed displacement", "Size tested", "Reference :math:`(\mathrm{MPa})` ", "Tolerance (%)"
    ":math:`\mathrm{500mm}` "," SIEQ_ELGA ", "1125", "0.2"
    ":math:`\mathrm{700mm}` "," SIEQ_ELGA ", "1411", "0.2"
    ":math:`\mathrm{900mm}` "," SIEQ_ELGA ", "1664", "0.2"
    ":math:`\mathrm{1100mm}` "," SIEQ_ELGA ", "1891.7", "0.2"