8. F modeling#
8.1. Characteristics of modeling#
It is the same modeling as modeling E, but with plane constraints. The junctions are constructed in the same way.
8.2. Characteristics of the mesh#
The mesh, identical to that of modeling B, is represented in FIG. 4.2-a.
8.3. Tested sizes and results#
The quantities tested are identical to those presented for the E modeling.
Identification |
Reference |
tolerance |
0.05 |
|
DEPZON_1 |
DX- \({\mathrm{Depl}}_{X}\) |
MIN |
0 |
|
MAX |
0 |
0.05 |
||
DY- \({\mathrm{Depl}}_{Y}\) |
MIN |
0 |
0.05 |
|
MAX |
0 |
0.05 |
||
DEPZON_2 |
DX- \({\mathrm{Depl}}_{X}\) |
MIN |
0 |
0.05 |
MAX |
0 |
0.05 |
||
DY- \({\mathrm{Depl}}_{Y}\) |
MIN |
0 |
0.05 |
|
MAX |
0 |
0.05 |
||
DEPZON_3 |
DX- \({\mathrm{Depl}}_{X}\) |
MIN |
0 |
0.05 |
MAX |
0 |
0.05 |
||
DY- \({\mathrm{Depl}}_{Y}\) |
MIN |
0 |
0.05 |
|
MAX |
0 |
0.05 |
||
DEPZON_4 |
DX- \({\mathrm{Depl}}_{X}\) |
MIN |
0 |
0.05 |
MAX |
0 |
0.05 |
||
DY- \({\mathrm{Depl}}_{Y}\) |
MIN |
0 |
0.05 |
|
MAX |
0 |
0.05 |
||
Table 8.3-1
The deformation is shown in Figure 8.4-a.
Figure 8.4-a: Deformed structure (Exaggeration 10).
8.4. notes#
The remarks are identical to those formulated for modeling E.