5. C modeling

5.1. Characteristics of modeling

It is the same modeling as modeling A, but in 3D. The intersection is constructed in the same way.

5.2. Characteristics of the mesh

The mesh, which comprises 25 cells of the HEXA8 type, is represented in FIG. 5.2-a. The mesh is sufficiently unrefined to find itself in the same situation as in the case of modeling A.

Figure 5.2-a: The C modeling mesh.

5.3. Tested sizes and results

The quantities tested are identical to those presented for modeling A and tests on DZ are added.

Identification		Reference	% tolerance	1.00E-11
DEPZON_1	DX	MIN	-0.25
		MAX	-0.25	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11
DEPZON_2	DX	MIN	-0.5	1.00E-11
		MAX	-0.5	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11
DEPZON_3	DX	MIN	0.75	1.00E-11
		MAX	0.75	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11
DEPZON_4	DX	MIN	0.75	1.00E-11
		MAX	0.75	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11

Table 5.3-1

The deformation is represented in FIG. 5.4-a.

Figure 5.4-a: Deformed structure.

5.4. notes

The remarks are identical to those specified for modeling A.