6. D modeling

6.1. Characteristics of modeling

This is the same modeling as C modeling.

6.2. Characteristics of the mesh

The mesh, which comprises 162 cells of the TETRA4 type, is represented in FIG. 6.2-a. The mesh is sufficiently unrefined to find itself in the same situation as in modeling A.

Figure 6.2-a: The modeling mesh D.

6.3. Tested sizes and results

The quantities tested are identical to those presented for the C modeling.

Identification		Reference	% tolerance	1.00E-11
DEPZON_1	DX	MIN	-0.25
		MAX	-0.25	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11
DEPZON_2	DX	MIN	-0.5	1.00E-11
		MAX	-0.5	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11
DEPZON_3	DX	MIN	0.75	1.00E-11
		MAX	0.75	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11
DEPZON_4	DX	MIN	0.75	1.00E-11
		MAX	0.75	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11

Table 6.3-1

The deformation is represented in FIG. 6.4-a.

Figure 6.4-a: Deformed structure.

6.4. notes

The remarks are identical to those specified for modeling A.