v6.04.128 SSNV128 - Plate with contact and friction on a rigid plane

Summary:

This problem corresponds to a semi-static analysis of a mechanical problem with contact and friction. A square plate is compressed on an undeformable plane where it experiences contact and friction forces. This test is based on 2D results from an average of codes.

This test includes models to test:

• 2D models (QUAD4, QUAD8, TRIA3 and TRIA6) and 3D models (HEXA8, HEXA20, HEXA27, PENTA6, PENTA15, TETRA4 and), TETRA10

• the algorithms for treating contact with friction “PENALISATION” and “CONTINUE”,

• the geometric update of the contact

• different matching algorithm options

• various options specific to the case of friction

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainties about the solution
  • 2.4. Bibliographical reference
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
  • 4.4. notes
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested sizes and results
  • 5.4. notes
• 6. D modeling
  • 6.1. Characteristics of modeling
  • 6.2. Characteristics of the mesh
  • 6.3. Tested sizes and results
  • 6.4. notes
• 7. E modeling
  • 7.1. Characteristics of modeling
  • 7.2. Characteristics of the mesh
  • 7.3. Tested sizes and results
  • 7.4. notes
• 8. G modeling
  • 8.1. Characteristics of modeling
  • 8.2. Characteristics of the mesh
  • 8.3. Tested sizes and results
  • 8.4. notes
• 9. K modeling
  • 9.1. Characteristics of modeling
  • 9.2. Characteristics of the mesh
  • 9.3. Tested sizes and results
  • 9.4. notes
• 10. M modeling
  • 10.1. Characteristics of modeling
  • 10.2. Characteristics of the mesh
  • 10.3. Tested sizes and results
  • 10.4. notes
• 11. N modeling
  • 11.1. Characteristics of modeling
  • 11.2. Characteristics of the mesh
  • 11.3. Tested sizes and results
  • 11.4. notes
• 12. P modeling
  • 12.1. Characteristics of modeling
  • 12.2. Characteristics of the mesh
  • 12.3. Tested sizes and results
  • 12.4. notes
• 13. Q modeling
  • 13.1. Characteristics of modeling
  • 13.2. Characteristics of the mesh
  • 13.3. Tested sizes and results
  • 13.4. notes
• 14. R modeling
  • 14.1. Characteristics of modeling
  • 14.2. Characteristics of the mesh
  • 14.3. Tested sizes and results
  • 14.4. notes
• 15. W modeling
  • 15.1. Characteristics of modeling
  • 15.2. Characteristics of the mesh
  • 15.3. Tested sizes and results
  • 15.4. notes
• 16. X modeling
  • 16.1. Characteristics of modeling
  • 16.2. Characteristics of the mesh
  • 16.3. Tested sizes and results
  • 16.4. notes
• 17. Y modeling
  • 17.1. Characteristics of modeling
  • 17.2. Characteristics of the mesh
  • 17.3. Tested sizes and results
  • 17.4. notes
• 18. Z modeling
  • 18.1. Characteristics of modeling
  • 18.2. Characteristics of the mesh
  • 18.3. Tested sizes and results
  • 18.4. notes
• 19. Summary of results