14. R modeling#
14.1. Characteristics of modeling#
The modeling is 3D, only the edge of the frame is represented.
14.2. Characteristics of the mesh#
Number of knots: 792
Number of meshes and types: 320 HEXA8 for the plate and 32 QUAD4 for the frame.
14.3. Tested sizes and results#
First calculation (formulation “CONTINUE”, solver “MULT_FRONT”)
Identification |
Reference type |
Reference value |
Tolerance |
\(\mathit{DX}\) at the point \(A\) instant \(1.0\) |
“SOURCE_EXTERNE” |
2.86E-5 |
5.0% |
\(\mathit{DX}\) at point \(B\) instant \(1.0\) |
“SOURCE_EXTERNE” |
2.72E-5 |
5.0% |
\(\mathit{DX}\) at the point \(C\) instant \(1.0\) |
“SOURCE_EXTERNE” |
2.28E-5 |
5.0% |
\(\mathit{DX}\) at the point \(D\) instant \(1.0\) |
“SOURCE_EXTERNE” |
1.98E-5 |
5.0% |
\(\mathit{DX}\) at the point \(E\) instant \(1.0\) |
“SOURCE_EXTERNE” |
1,5E-5 |
5,0% |
14.4. notes#
The results obtained are close to the external source to within 5% (code mean). The linear solver has no influence on the results.
This modeling validates in 3D the exclusion of knots only from the resolution of friction in continuous formulation.