4. B modeling

4.1. Characteristics of modeling

It is the same modeling as modeling A, but with plane constraints, C_ PLAN. The junctions are constructed in the same way.

4.2. Characteristics of the mesh

The mesh, which comprises 176 cells of the TRIA3 type, is represented in FIG. 4.2-a.

Figure 4.2-a: The modeling B mesh.

4.3. Tested sizes and results

The quantities tested are identical to those used for modeling A.

Identification		Reference	% tolerance	1.00E-11
DEPZON_1	DX	MIN	-0.25
		MAX	-0.25	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11
DEPZON_2	DX	MIN	-0.5	1.00E-11
		MAX	-0.5	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11
DEPZON_3	DX	MIN	0.75	1.00E-11
		MAX	0.75	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11
DEPZON_4	DX	MIN	0.75	1.00E-11
		MAX	0.75	1.00E-11
	DY	MIN	0	1.00E-11
		MAX	0	1.00E-11

Table 4.3-1

The deformation is represented in FIG. 4.4-a.

Figure 4.4-a: Deformed structure.

We test the value of \({E}^{e}\) produced by the POST_ERREUR operator.

Identification	Reference type	Reference value
Ee	“ANALYTIQUE”	0

We test the value of \({\parallel u\parallel }_{{L}^{2}}\) produced by the POST_ERREUR operator.

4.4. notes

The remarks are identical to those specified for modeling A.