6. D modeling#

6.1. Characteristics of modeling#

A modeling testing the functionalities of knot-to-mesh contact (DEFI_CONTACT) without friction treated with the GCP method has been implemented. Given the symmetry of the problem, it comprises a quarter of the ring as well as the mesh of a non-deformable plate.

_images/1000000000000170000001C015F9DD4B7346FD34.png

Boundary condition:

Symmetry conditions:

the nodes of group \(\mathrm{LAB}\) located in the plane \(X=0\) are blocked in the direction \(X\) (\(\mathrm{DX}=0\)), the nodes of the group \(\mathrm{LCD}\) located in the plane \(Y=0\) are blocked in the direction \(Y\) (DY=0), all the nodes in mesh group \(«\mathrm{Plaque}»\) are blocked in the direction \(X\) (\(\mathrm{DX}=0\))

To avoid rigid body movements, nodes A and P1 have the same vertical displacement.

Loads:

Imposed displacement as follows \(Y\) on all nodes of the plate: \(\mathrm{DY}\) varies from \(0\) to \(\mathrm{2,225}\mathrm{cm}\).

(the value of \(\mathrm{4,45}\mathrm{cm}\) is the vertical approximation of the two symmetric plates).

Notes:

The mesh was made in \(\mathrm{cm}\) .

6.2. Characteristics of the mesh#

The mesh is identical in every way to the mesh used for modeling A.

6.3. Tested sizes and results#

Identification

Moments

Reference

% tolerance

reaction force (\(N\))

—8.01

7.8

reaction force (\(N\))

—16.02

1.8

reaction force (\(N\))

—24.02

1.3

reaction force (\(N\))

—32.03

1.9

DX (GROUP_NO =”D”) (\(\mathrm{cm}\))

NON_REGRESSION

DX (GROUP_NO =”D”) (\(\mathrm{cm}\))

SIXX (GROUP_NO =”A”) (\(N/{\mathrm{cm}}^{2}\))

SIXX (GROUP_NO =”A”) (\(N/{\mathrm{cm}}^{2}\))

6.4. notes#

The results are almost identical to those of modeling A and B.