4. B modeling#
4.1. Characteristics of modeling#
Modeling B repeats modeling A by rotating the model of \(90°\). The axis of rotation is along the axis \(Y\).
4.2. Characteristics of the mesh#
Number of stitches SEG2 |
21 |
4.3. Results: comparison between 3D and 1D calculations#
The same results as those of modeling A are found, summarized in the table.
Identification |
Reference type |
Reference value |
Tolerance |
Open crack - \(\mathit{DZ}\) at the end |
“AUTRE_ASTER” |
4.52765E-09 |
|
Open crack - \(\mathit{DZ}\) at the end |
“NON_REGRESSION” |
4.8308805E-09 |
|
Crack closed - \(\mathit{DZ}\) at the end |
“AUTRE_ASTER” |
1.77757E-09 |
|
Crack closed - \(\mathit{DZ}\) at the end |
“NON_REGRESSION” |
1.8442025E-09 |
|
Table 4.3-1 : Summary of tested results