3. Modeling A#
3.1. Characteristics of modeling#
Corner section:
The coordinates of the points are:
\(\mathit{P1}\) |
0.0 |
0.0 |
\(\mathit{P2}\) |
1.3E—02 |
0.0 |
\(\mathit{P3}\) |
4.75E—02 |
0.0 |
\(\mathit{P4}\) |
5.0E—02 |
0.0E+00 |
\(\mathit{P5}\) |
5.0E—02 |
5.5E—03 |
\(\mathit{P6}\) |
4.750E—02 |
8.0E—03 |
\(\mathit{P7}\) |
1.30E—02 |
8.0E—03 |
\(\mathit{P10}\) |
8.0E—03 |
1.300E—02 |
\(\mathit{P11}\) |
8.0E—03 |
4.75E—02 |
\(\mathit{P12}\) |
5.5E—03 |
5.0E—02 |
\(\mathit{P13}\) |
5.0E—02 |
3.2. Characteristics of the mesh#
182 TRIA6 stitches.
3.3. Benchmark solution#
No exact analytical solution. The values are non-regression values.
3.4. Tested sizes and results#
Identification |
Reference |
Tolerance |
\(A\) |
7.39E—04 |
1.00E-03 |
\(\mathit{ALPHA}\) |
1.35E+02 |
1.00E-03 |
\({\mathit{CDG}}_{Y}\) |
1.53E—02 |
1.50E-03 |
\({\mathit{CDG}}_{Z}\) |
1.53E—02 |
1.50E-03 |
\(\mathit{JX}\) |
1.43E—08 |
1.20E-01 |
\(\mathit{EY}\) |
0.00E+00 |
1.00E-03 |
\(\mathit{EZ}\) |
—1.60E—02 |
1.00E-03 |
\({\mathit{IY}}_{G}\) |
1.64E—07 |
4.00E-03 |
\({\mathit{IYR2}}_{P}\) |
1.41E—08 |
1.40E-02 |
\({\mathit{IYZ}}_{G}\) |
—9.50E—08 |
1.00E-03 |
\({\mathit{IZ}}_{G}\) |
1.64E—07 |
4.00E-03 |
\(\mathit{IY}\) |
6.95E—08 |
4.00E-03 |
\({\mathit{IZR2}}_{P}\) |
1.41E—08 |
1.40E-02 |
\(\mathit{IZ}\) |
2.60E—07 |
4.00E-03 |
\(\mathit{PCTY}\) |
—4.00E—03 |
1.00E-03 |
\(\mathit{PCTZ}\) |
—4.00E—03 |
1.00E-02 |
\({R}_{\mathit{MAX}}\) |
3.79E—02 |
1.00E-03 |
\({Y}_{\mathit{MAX}}\) |
3.54E—02 |
1.00E-03 |
\({Y}_{\mathit{MIN}}\) |
—3.54E—02 |
1.00E-03 |
\({Z}_{\mathit{MAX}}\) |
2.17E-002 |
1.00E-03 |
\({Z}_{\mathit{MIN}}\) |
—1.83E—02 |
1.00E-03 |