11. K modeling#
11.1. Characteristics of modeling#
Material point. 30 grains of fixed orientations. Homogenized polycrystalline behavior DD_CC.
The law used is PolyCrystal DDCC .mfront
11.2. Tested sizes and results#
The solution obtained with the Mfront behavior and that obtained with the similar behavior POLYCRISTAL of type DD_CC is compared, by testing the maximum of the relative difference of the following components:
Component |
Instant (s) |
Reference (difference) |
Tolerance |
EPZZ |
Maximum gap |
0 |
1.E-6 |
SIZZ |
Maximum gap |
0 |
3.E-2 |