9. H modeling#
9.1. Characteristics of modeling#
Material point. Orientation crystal (-1,4,9). Monocrystalline behavior DD_CC.
The law used is MonoCrystal DDCC .mfront.
9.2. Tested sizes and results#
We compare the solution obtained with the Mfront behavior and that obtained with the behavior MONO_DD_CC by testing the maximum of the relative difference of the following components:
Component |
Instant (s) |
Reference (difference) |
Tolerance Relative |
rho_5 |
Maximum gap |
0 |
1.E-3 |