K modeling
==============


Characteristics of modeling
-----------------------------------

Material point. 30 grains of fixed orientations. Homogenized polycrystalline behavior DD_CC.

The law used is PolyCrystal DDCC .mfront


Tested sizes and results
------------------------------

The solution obtained with the Mfront behavior and that obtained with the similar behavior POLYCRISTAL of type DD_CC is compared, by testing the maximum of the relative difference of the following components:


.. csv-table::

    "**Component**", "**Instant (s)**", "**Reference (difference)**", "**Tolerance**"
    "EPZZ ", "Maximum gap", "0", "1.E-6"
    "SIZZ ", "Maximum gap", "0", "3.E-2"