v1.01.395 ZZZZ395 - Checking model reduction operators

Summary:

The objective of this test is to verify in an elementary way the reduction operators of model DEFI_BASE_REDUITE, DEFI_DOMAINE_REDUIT and REST_REDUIT_COMPLET.

We test in non-linear thermics (operator THER_NON_LINE) and in non-linear mechanics (operator STAT_NON_LINE).

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Reference solution
  • 2.1. Calculation method
  • 2.2. Reference quantities and results
  • 2.3. Uncertainty about the solution
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
  • 4.4. notes
• 5. C modeling
  • 5.1. Characteristics of modeling
  • 5.2. Characteristics of the mesh
  • 5.3. Tested sizes and results
  • 5.4. notes
• 6. D modeling
  • 6.1. Characteristics of modeling
  • 6.2. Characteristics of the mesh
  • 6.3. Tested sizes and results
  • 6.4. notes
• 7. E modeling
  • 7.1. Characteristics of modeling
  • 7.2. Characteristics of the mesh
  • 7.3. Tested sizes and results
  • 7.4. notes
• 8. F modeling
  • 8.1. Characteristics of modeling
  • 8.2. Characteristics of the mesh
  • 8.3. Tested sizes and results
  • 8.4. notes
• 9. G modeling
  • 9.1. Characteristics of modeling
  • 9.2. Characteristics of the mesh
  • 9.3. Tested sizes and results
  • 9.4. notes
• 10. H modeling
  • 10.1. Characteristics of modeling
  • 10.2. Characteristics of the mesh
  • 10.3. Tested sizes and results
  • 10.4. notes
• 11. Modeling I
  • 11.1. Characteristics of modeling
  • 11.2. Characteristics of the mesh
  • 11.3. Tested sizes and results
  • 11.4. notes
• 12. J modeling
  • 12.1. Characteristics of modeling
  • 12.2. Characteristics of the mesh
  • 12.3. Tested sizes and results
  • 12.4. notes
• 13. K modeling
  • 13.1. Characteristics of modeling
  • 13.2. Characteristics of the mesh
  • 13.3. Tested sizes and results
  • 13.4. notes
• 14. L modeling
  • 14.1. Characteristics of modeling
  • 14.2. Characteristics of the mesh
  • 14.3. Tested sizes and results
  • 14.4. notes
• 15. M modeling
  • 15.1. Characteristics of modeling
  • 15.2. Characteristics of the mesh
  • 15.3. Tested sizes and results
• 16. N modeling
  • 16.1. Characteristics of modeling
  • 16.2. Characteristics of the mesh
  • 16.3. Tested sizes and results
  • 16.4. notes
• 17. O modeling
  • 17.1. Characteristics of modeling
  • 17.2. Characteristics of the mesh
  • 17.3. Tested sizes and results
  • 17.4. notes
• 18. P modeling
  • 18.1. Characteristics of modeling
  • 18.2. Characteristics of the mesh
  • 18.3. Tested sizes and results
• 19. Q modeling
  • 19.1. Characteristics of modeling
  • 19.2. Characteristics of the mesh
  • 19.3. Tested sizes and results
• 20. R modeling
  • 20.1. Characteristics of modeling
  • 20.2. Characteristics of the mesh
  • 20.3. Tested sizes and results
• 21. S modeling
  • 21.1. Characteristics of modeling
  • 21.2. Characteristics of the mesh
  • 21.3. Tested sizes and results
• 22. T modeling
  • 22.1. Characteristics of modeling
  • 22.2. Characteristics of the mesh
  • 22.3. Tested sizes and results
• 23. U modeling
  • 23.1. Characteristics of modeling
  • 23.2. Characteristics of the mesh
  • 23.3. Tested sizes and results
  • 23.4. notes