20. R modeling#

20.1. Characteristics of modeling#

This modeling is used to verify the reconstruction of a field of type SIEF_ELGA in REST_REDUIT_COMPLET.

The primal basis on the movements DEPL is taken from the F modeling and the dual base on the field SIEF_ELGA was produced by Q modeling.

In addition, a partial base is also built on by selecting only the component SIXX.

The mesh contains 27 elements of type HEXA8.

The reference values are taken from the full calculation used to build the base SIEF_ELGA in Q modeling:

For the complete database (with all components):

Identification	Reference type (Q modeling)	Tolerance
Mesh \({CellInRID}\) - SIEF_ELGA/SIXX —Point 1	AUTRE_ASTER	\({0,0046}\)
Mesh \({CellInRID}\) - SIEF_ELGA/SIYY —Point 1	AUTRE_ASTER	\({0,0046}\)
Mesh \({CellInRID}\) - SIEF_ELGA/SIZZ —Point 1	AUTRE_ASTER	\({0,005}\)
Mesh \({CellOutRID}\) - SIEF_ELGA/SIXX —Point 1	AUTRE_ASTER	\({0,002}\)
Mesh \({CellOutRID}\) - SIEF_ELGA/SIYY —Point 1	AUTRE_ASTER	\({0,0019}\)
Mesh \({CellOutRID}\) - SIEF_ELGA/SIZZ —Point 1	AUTRE_ASTER	\({0,0015}\)

For the partial base (with NOM_CMP =” SIXX “):

Identification	Reference type (Q modeling)	Tolerance
Mesh \({CellInRID}\) - SIEF_ELGA/SIXX —Point 1	AUTRE_ASTER	\({0,0046}\)
Mesh \({CellInRID}\) - SIEF_ELGA/SIYY —Point 1	AUTRE_ASTER	\({0,0046}\)
Mesh \({CellInRID}\) - SIEF_ELGA/SIZZ —Point 1	AUTRE_ASTER	\({0,005}\)
Mesh \({CellOutRID}\) - SIEF_ELGA/SIXX —Point 1	AUTRE_ASTER	\({0,0025}\)
Mesh \({CellOutRID}\) - SIEF_ELGA/SIYY —Point 1	ANALYTIQUE	\({0,0}\)
Mesh \({CellOutRID}\) - SIEF_ELGA/SIZZ —Point 1	ANALYTIQUE	\({0,0}\)

Apart from RID, SIYY = SIZZ =0 must be because the base is zero on these components.