v1.01.323 ZZZZ323 — Validation of the printing of local landmarks by IMPR_RESU/CONCEPT

Summary:

The objective of this test is to validate the printing in a file MEDdes local markers assigned to the elements by the AFFE_CARA_ELEM operator.

5 models are made:

• A: beams, discrete elements

• B: shells, grids and membranes on linear meshes

• C: shells, grids and membranes on quadratic cells

• D: massive 3D elements

• E: massive 2D elements

The 5 models have different geometries, so the « Geometry » and « Reference Results » paragraphs will therefore be treated in each model.

To test file MED, it is re-read by LIRE_CHAMP after being created by IMPR_RESU.

• 1. Modeling A
  • 1.1. Geometry and modeling
  • 1.2. Orientation of the local coordinate system
  • 1.3. Calculation of local landmarks
  • 1.4. Tested sizes
• 2. B modeling
  • 2.1. Geometry and modeling
  • 2.2. Orientation of the local coordinate system
  • 2.3. Calculation of local landmarks
  • 2.4. Tested sizes
• 3. C modeling
  • 3.1. Geometry and modeling
  • 3.2. Orientation of the local coordinate system
  • 3.3. Calculation of local landmarks
  • 3.4. Tested sizes
• 4. D modeling
  • 4.1. Geometry and modeling
  • 4.2. Orientation of the local coordinate system
  • 4.3. Calculating local landmarks
  • 4.4. Tested sizes
• 5. E modeling
  • 5.1. Geometry and modeling
  • 5.2. Orientation of the local coordinate system
  • 5.3. Calculating local landmarks
  • 5.4. Tested sizes
• 6. Summary of results