5. C modeling#
5.1. Characteristics of modeling#
Same case as modeling \(A\) but in \(\mathrm{3D}\). The expected results are the same.
The modeling used is 3D_ HH2S.
5.2. Characteristics of the mesh#
Number of knots: 1913
Number of meshes and types: 206 meshes, 200 HEXA20et 6 QUAD8
5.3. Tested sizes and results#
Identification |
Reference Type |
Value |
Tolerance ( \(\text{\%}\) ) |
Component \(\mathrm{INTE}\text{\_}\mathrm{FH11}\), location \(\mathrm{MDROITE}\) |
“AUTRE_ASTER” |
-2.0E-10 |
|
Component \(\mathrm{INTE}\text{\_}\mathrm{FH11}\), location \(\mathrm{MMIL}\) |
“AUTRE_ASTER” |
2.0E-10 |
|
Component \(\mathrm{INTE}\text{\_}\mathrm{FH11}\), location \(\mathrm{MGAUCHE}\) |
“AUTRE_ASTER” |
2.0E-10 |
|
The hydraulic flow is tested at the first Gauss point of cell \({M}_{401}\) at order number 5:
Identification |
Reference Type |
Value |
Tolerance ( \(\text{\%}\) ) |
Component \(\mathrm{FH11}\) |
“NON_REGRESSION” |
2.00133E-10 |
|
Component \(\mathrm{FH22}\) |
“NON_REGRESSION” |
1.99933E-11 |
|