4. B modeling#
4.1. Characteristics of modeling#
Same case as before but in axisymmetric. The expected results are different as a result of integration:
\({\mathrm{\int }}_{\Gamma }{M}_{11}\mathrm{.}\nu \mathrm{=}{M}_{11}\mathrm{.}\nu {\mathrm{\int }}_{0}^{1}{\mathrm{\int }}_{0}^{1}r\mathit{dr}d\theta \mathrm{=}0.5{M}_{11}\mathrm{.}\nu\)
The modeling used is AXIS_HH2S.
4.2. Characteristics of the mesh#
Number of knots: 805
Number of meshes and types: 406 meshes, 206 SEG3et 200 QUAD8
4.3. Tested sizes and results#
Identification |
Reference Type |
Value |
Tolerance ( \(\text{\%}\) ) |
Component \(\mathrm{INTE}\text{\_}\mathrm{FH11}\), location \(\mathrm{MDROITE}\) |
“AUTRE_ASTER” |
-1.0E-10 |
|
Component \(\mathrm{INTE}\text{\_}\mathrm{FH11}\), location \(\mathrm{MMIL}\) |
“AUTRE_ASTER” |
1.0E-10 |
|
Component \(\mathrm{INTE}\text{\_}\mathrm{FH11}\), location \(\mathrm{MGAUCHE}\) |
“AUTRE_ASTER” |
1.0E-10 |
|
The hydraulic flow is tested at the first Gauss point of cell \({M}_{401}\) at order number 5:
Identification |
Reference Type |
Value |
Tolerance ( \(\text{\%}\) ) |
Component \(\mathrm{FH11}\) |
“NON_REGRESSION” |
2.00136E-10 |
|
Component \(\mathrm{FH22}\) |
“NON_REGRESSION” |
|