C modeling
=============


Characteristics of modeling
-----------------------------------

Same case as modeling :math:`A` but in :math:`\mathrm{3D}`. The expected results are the same.

The modeling used is 3D_ HH2S.


Characteristics of the mesh
----------------------------

Number of knots: 1913

Number of meshes and types: 206 meshes, 200 HEXA20et 6 QUAD8


Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference Type**", "**Value**", "**Tolerance (** :math:`\text{\%}` **)**"
    "Component :math:`\mathrm{INTE}\text{\_}\mathrm{FH11}`,
    location :math:`\mathrm{MDROITE}` ", "'AUTRE_ASTER'", "-2.0E-10"," 0.1%"
    "Component :math:`\mathrm{INTE}\text{\_}\mathrm{FH11}`,
    location :math:`\mathrm{MMIL}` ", "'AUTRE_ASTER'", "2.0E-10"," 0.1%"
    "Component :math:`\mathrm{INTE}\text{\_}\mathrm{FH11}`,
    location :math:`\mathrm{MGAUCHE}` ", "'AUTRE_ASTER'", "2.0E-10"," 0.1%"


The hydraulic flow is tested at the first Gauss point of cell :math:`{M}_{401}` at order number 5:


.. csv-table::

    "**Identification**", "**Reference Type**", "**Value**", "**Tolerance (** :math:`\text{\%}` **)**"
    "Component :math:`\mathrm{FH11}` ", "'NON_REGRESSION'", "2.00133E-10"," 0.1%"
    "Component :math:`\mathrm{FH22}` ", "'NON_REGRESSION'", "1.99933E-11"," 0.1%"