9. H modeling#
9.1. Characteristics of H modeling#
3D_HS modeling. This modeling corresponds to the Elements Finis modeling. The hydraulic coupling law is LIQU_SATU. The mesh consists of 100 HEXA20 elements.
9.2. Results#
The results are very similar to those obtained with finite element modeling D_ PLAN_HH2S (B modeling).
9.3. Tested values#
Tests are carried out on 2 nodes at 1 moment by comparing the results with the analytical solution.
Points \((x,y)\) |
Time \((s)\) |
PRE1 Aster |
Relative error allowed ( \(\text{\%}\) ) |
\((\mathrm{0,05};-\mathrm{0,5};-\mathrm{0,5})\) \(\mathrm{N108}\) |
100 |
-8.89E+02 |
1% |
\((\mathrm{0,05};\mathrm{0,5};\mathrm{0,5})\) \(\mathrm{N306}\) |
100 |
-8.89E+02 |
1% |
Table 9.3-1 : Values tested