H modeling
==============


Characteristics of H modeling
-------------------------------------

3D_HS modeling. This modeling corresponds to the Elements Finis modeling. The hydraulic coupling law is LIQU_SATU. The mesh consists of 100 HEXA20 elements.


Results
---------

The results are very similar to those obtained with finite element modeling D_ PLAN_HH2S (B modeling).


Tested values
---------------

Tests are carried out on 2 nodes at 1 moment by comparing the results with the analytical solution.


.. csv-table::

    "**Points** :math:`(x,y)` ", "**Time** :math:`(s)` ", "**PRE1** **Aster**", "**Relative error allowed (** :math:`\text{\%}` **)**"
    ":math:`(\mathrm{0,05};-\mathrm{0,5};-\mathrm{0,5})`
    :math:`\mathrm{N108}` ", "100", "-8.89E+02", "1%"
    ":math:`(\mathrm{0,05};\mathrm{0,5};\mathrm{0,5})`
    :math:`\mathrm{N306}` ", "100", "-8.89E+02", "1%"


**Table** 9.3-1 **: Values tested**