3. Modeling A

3.1. Characteristics of modeling

The models tested are DIS_T and DIS_TR on meshes and dots. The stiffness characteristics of the discretes are therefore of the type: K_T_D_L, K_ TR_D_L, K_T_D_N, K_ TR_D_N.

3.2. Characteristics of the mesh

Number of knots: 6, number of stitches: 4, elements SEG2: 2, elements POI1: 2.

3.3. Boundary conditions and loads

The condition while traveling is a function of time:

\({U}_{0}\mathrm{.}\mathrm{sin}(2\pi \mathrm{.}\mathrm{f.t})\) with \(f=5\mathrm{Hz};{U}_{0}=0.1m\)

3.4. Discretization in time

The analysis time step and time interval are:

\(\Delta t=\mathrm{4,0}{10}^{-3}s\) and \(t\in [0s\mathrm{,1}s]\)

3.5. Tested sizes and results

The quantities tested are displacement and efforts. The values are those shown in the table.

Tolerances are by default.