3. Modeling A#
3.1. Characteristics of modeling#
The test is performed on a hardware point with the SIMU_POINT_MAT command. We work with imposed deformations.
Work hardening is linear.
3.2. Reference quantities and results#
Focus on |
Quantity verified |
Reference value |
Reference type |
Tolerance (relative) |
1 |
Trace constraints |
\({I}_{1}^{1}=\mathrm{39,51}\mathrm{MPa}\) |
|
|
2 |
Trace constraints |
\({I}_{1}^{\mathrm{1c}}=-\mathrm{68,49}\mathrm{MPa}\) |
|
|
3 or 4 |
Spherical part of plastic deformation |
\({\varepsilon }_{v\text{2}}^{p}=\mathrm{0,03667}\) |
|
|
3 or 5 |
Constraint trace |
\({I}_{1}^{\mathrm{ult}}=50\mathrm{MPa}\) |
|
|
5 |
Spherical part of plastic deformation |
\({\varepsilon }_{v\text{3}}^{p}=\mathrm{0,051667}\) |
|
|