Modeling A
==============


Characteristics of modeling
------------------------

The test is performed on a hardware point with the SIMU_POINT_MAT command. We work with imposed deformations.

Work hardening is linear.


Reference quantities and results
------------------------


.. csv-table::

    "**Focus on**", "**Quantity verified**", "**Reference value**", "**Reference type**", "**Tolerance (relative)**"
    "1", "Trace constraints", ":math:`{I}_{1}^{1}=\mathrm{39,51}\mathrm{MPa}` "," ANALYTIQUE "," :math:`{10}^{-6}`%"
    "2", "Trace constraints", ":math:`{I}_{1}^{\mathrm{1c}}=-\mathrm{68,49}\mathrm{MPa}` "," ANALYTIQUE "," :math:`{10}^{-6}`%"
    "3 or 4", "Spherical part of plastic deformation", ":math:`{\varepsilon }_{v\text{2}}^{p}=\mathrm{0,03667}` "," ANALYTIQUE "," :math:`{10}^{-6}`%"
    "3 or 5", "Constraint trace", ":math:`{I}_{1}^{\mathrm{ult}}=50\mathrm{MPa}` "," ANALYTIQUE "," :math:`{10}^{-6}`%"
    "5", "Spherical part of plastic deformation", ":math:`{\varepsilon }_{v\text{3}}^{p}=\mathrm{0,051667}` "," ANALYTIQUE "," :math:`{10}^{-6}`%"