8. F modeling

8.1. Characteristics of modeling

Plane Constraint Modeling.

8.2. Characteristics of the mesh

Number of knots: 4
Number of meshes:	1 of type QUAD 4
	4 of type SEG2

The following meshes are defined:

\({L}_{\mathrm{INF}}\)	\(\mathrm{NO1}\) \(\mathrm{NO2}\)
\({L}_{\mathrm{DRT}}\)	\(\mathrm{NO2}\) \(\mathrm{NO4}\)
\({L}_{\text{SUP}}\)	\(\mathrm{NO4}\) \(\mathrm{NO3}\)
\({L}_{\mathrm{GCH}}\)	\(\mathit{NO3}\) \(\mathrm{NO1}\)

The travel limit conditions imposed are:

On \({L}_{\mathrm{GCH}}\): \(\mathrm{DY}=0\)

On \({L}_{\mathrm{INF}}\): \(\mathrm{DX}=0\)

The load consists of the same drying field and the same \(1/2\) nodal force applied to both \({L}_{\text{SUP}}\) nodes.

8.3. Tested sizes and results

Component \({\varepsilon }_{\mathit{yy}}\) at node \(\mathit{NO3}\) has been tested