F modeling
==============


Characteristics of modeling
-----------------------------------

Plane Constraint Modeling.


.. image:: images/Object_290.svg
    :width: 337
    :height: 257


.. _RefImage_Object_290.svg:


Characteristics of the mesh
----------------------------


+------------------+----------------+
|Number of knots: 4                 |
+------------------+----------------+
|Number of meshes: |1 of type QUAD 4|
+------------------+----------------+
|                  |4 of type SEG2  |
+------------------+----------------+

The following meshes are defined:


.. csv-table::

    ":math:`{L}_{\mathrm{INF}}` "," :math:`\mathrm{NO1}` :math:`\mathrm{NO2}`"
    ":math:`{L}_{\mathrm{DRT}}` "," :math:`\mathrm{NO2}` :math:`\mathrm{NO4}`"
    ":math:`{L}_{\text{SUP}}` "," :math:`\mathrm{NO4}` :math:`\mathrm{NO3}`"
    ":math:`{L}_{\mathrm{GCH}}` "," :math:`\mathit{NO3}` :math:`\mathrm{NO1}`"


The travel limit conditions imposed are:

On :math:`{L}_{\mathrm{GCH}}`: :math:`\mathrm{DY}=0`

On :math:`{L}_{\mathrm{INF}}`: :math:`\mathrm{DX}=0`

The load consists of the same drying field and the same :math:`1/2` nodal force applied to both :math:`{L}_{\text{SUP}}` nodes.


Tested sizes and results
------------------------------

Component :math:`{\varepsilon }_{\mathit{yy}}` at node :math:`\mathit{NO3}` has been tested


.. csv-table::

    "**Instant**", "**Reference Type**", "**Reference**", "**% Tolerance**"
    "0. "," SOURCE_EXTERNE ", "0. ", "-"
    "1.0000E+00"," SOURCE_EXTERNE ", "—3.22581D-05", "0.1"
    "9.7041E+04"," SOURCE_EXTERNE ", ", "— 3.89947D-05", "0.1"
    "1.8389E+06"," SOURCE_EXTERNE ", "—6.55895D-05", "0.1"
    "8.6400E+06"," SOURCE_EXTERNE ", ", "— 1.32437D-04", "0.1"