4. B modeling

4.1. Characteristics of modeling

\(\mathrm{2D}\) axisymmetric modeling.

4.2. Characteristics of the mesh

Number of knots: 4
Number of meshes:	1 of type QUAD 4
	4 of type SEG2

The following meshes are defined:

\({L}_{\mathrm{INF}}\)	\(\mathrm{NO1}\) \(\mathrm{NO2}\)
\({L}_{\mathrm{DRT}}\)	\(\mathrm{NO2}\) \(\mathrm{NO4}\)
\({L}_{\text{SUP}}\)	\(\mathrm{NO4}\) \(\mathrm{NO3}\)
\({L}_{\mathrm{GCH}}\)	\(\mathrm{NO3}\) \(\mathrm{NO1}\)

The travel limit conditions imposed are:

On \({L}_{\mathrm{GCH}}\): \(\mathrm{DY}=0\)

On \({L}_{\mathrm{INF}}\): \(\mathrm{DX}=0\)

The load consists of the same drying field and the same \(1/2\) nodal force applied to both \({L}_{\text{SUP}}\) nodes.

4.3. Tested sizes and results

Component \({\varepsilon }_{\mathit{yy}}\) at node \(\mathrm{NO3}\) has been tested

Instant	Reference	Type	Error
		ANALYTIQUE	0
1.0000E+00	—3.225814D-05	ANALYTIQUE	5.0 E-03
9.7041E+04	— 3.867143D-05	ANALYTIQUE	5.0 E-03	5.0E-03
1.8389E+06	—6.088552D-05	ANALYTIQUE	5.0 E-03	5.0E-03
8.6400E+06	— 1.100478D-04	ANALYTIQUE	5.0 E-03