11. Modeling I

11.1. Characteristics of modeling

Modeling DKTG

11.2. Characteristics of the mesh

Number of knots: 222

Number of meshes and type: 20 TRIA3 and 22 SEG2

11.3. Tested sizes and results

The incremental analysis is carried out in the pseudo-time interval \(\mathrm{[}\mathrm{0 }\mathrm{:}1.5\mathrm{]}\) in \(\mathrm{[}10\mathrm{]}\) with no load.

11.3.1. History of horizontal rotation \(\text{DRY}\) at loaded nodes

Instant	Couple \(m\)	Reference Type	Reference Value
(radians) »	Tolerance (%)
0.6		“ANALYTIQUE”	-0.6	0.01
1.2		“ANALYTIQUE”	-1.2	0.01
1.4		“ANALYTIQUE”	-1.5	0.01

11.3.2. History of horizontal displacement \(\text{DX}\) at loaded nodes

Instant	Couple \(m\)	Reference Type	Reference Value
\(m\) «	Tolerance (%)
0.6		“ANALYTIQUE”	-0.14932644	0.5
1.2		“ANALYTIQUE”	-2.23300762	0.25
1.4		“ANALYTIQUE”	-2.96107336	0.25	-2.96107336

11.3.3. History of vertical displacement \(\text{DZ}\) at loaded nodes

Instant	Couple \(m\)	Reference Type	Reference Value
\(m\) «	Tolerance (%)
0.6		“ANALYTIQUE”	2.91107308	0.5
1.2		“ANALYTIQUE”	5.31368538	0.5
1.4		“ANALYTIQUE”	5.92880612	0.5

11.3.3.1. notes

We use COEF_RIGI_DRZ = 0.001. The value of the angle of rotation reached is 86.5 degrees.