17. O modeling#
17.1. Characteristics of modeling#
We use 3D modelling_ HHO_222
17.2. Characteristics of the mesh#
The mesh consists of PYRAM5 meshes (elements subsequently converted by CREA_MAILLAGE), with a total of 1056 elements. The formulation is quadratic.
17.3. Tested sizes and results#
The modeling results are tested against the numerical reference solution presented in 2, and also in non-regression.
Location |
Instant |
Component (DEPL) |
VALE_REFE |
Precision |
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
DX |
\(-6.23907\mathit{mm}\) |
2% |
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
DY |
\(7.00031\mathit{mm}\) |
2% |
Identification |
Component |
Reference Type |
Tolerance |
Node Aen \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
|
0.001% |
Node Aen \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
|
0.001% |
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
|
0.001% |
Cen node \((\mathrm{24,}\mathrm{30,}0)\) |
|
|
0.001% |
Cen node \((\mathrm{24,}\mathrm{30,}0)\) |
|
|
0.001% |
Cen node \((\mathrm{24,}\mathrm{30,}0)\) |
|
|
0.001% |