15. M modeling#
15.1. Characteristics of modeling#
We use 3D modeling_ HHO_111
15.2. Characteristics of the mesh#
The mesh consists of PENTA6 meshes (linear prisms converted to quadratic prisms by CREA_MAILLAGE), with a total of 512 elements. The formulation is linear.
15.3. Tested sizes and results#
The modeling results are tested against the numerical reference solution presented in 2, and also in non-regression.
Location |
Instant |
Component (DEPL) |
VALE_REFE |
Precision |
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
DX |
\(-6.23907\mathit{mm}\) |
1% |
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
DY |
\(7.00031\mathit{mm}\) |
1% |
Identification |
Component |
Reference Type |
Tolerance |
Aen \((\mathrm{48,}\mathrm{60,}0.5)\) node |
DEPL /DX |
|
|
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
|
|
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
|
|
Cen \((\mathrm{24,}\mathrm{30,}0)\) node |
DEPL /DX |
|
|
Cen node \((\mathrm{24,}\mathrm{30,}0)\) |
|
|
|
Cen node \((\mathrm{24,}\mathrm{30,}0)\) |
|
|
|