O modeling
==============

Characteristics of modeling
-----------------------------------

We use 3D modelling_ HHO_222


Characteristics of the mesh
----------------------------

The mesh consists of PYRAM5 meshes (elements subsequently converted by CREA_MAILLAGE), with a total of 1056 elements. The formulation is quadratic.


Tested sizes and results
------------------------------

The modeling results are tested against the numerical reference solution presented in :ref:`2 <RefHeading__26035_1128081541>`, and also in non-regression.


.. csv-table::

    "**Location**", "**Instant**", "**Component** (DEPL)", "VALE_REFE ", "**Precision**"
    "Aen node :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," :math:`t=1s` ", "DX", ":math:`-6.23907\mathit{mm}` ", "2%"
    "Aen node :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," :math:`t=1s` ", "DY", ":math:`7.00031\mathit{mm}` ", "2%"



.. csv-table::

    "**Identification**", "**Component**", "**Reference Type**", "**Tolerance**"
    "Node Aen :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," DEPL /DX "," NON_REGRESSION ", "0.001%"
    "Node Aen :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," DEPL /DY "," NON_REGRESSION ", "0.001%"
    "Aen node :math:`(\mathrm{48,}\mathrm{60,}0.5)` "," SIEQ_ELNO/TRSIG "," NON_REGRESSION ", "0.001%"
    "Cen node :math:`(\mathrm{24,}\mathrm{30,}0)` "," DEPL /DX "," NON_REGRESSION ", "0.001%"
    "Cen node :math:`(\mathrm{24,}\mathrm{30,}0)` "," DEPL /DY "," NON_REGRESSION ", "0.001%"
    "Cen node :math:`(\mathrm{24,}\mathrm{30,}0)` "," SIEQ_ELNO/TRSIG "," NON_REGRESSION ", "0.001%"