16. N modeling#
16.1. Characteristics of modeling#
We use 3D modelling_ HHO_111
16.2. Characteristics of the mesh#
The mesh consists of 256 PENTA6 and 128 HEXA8 meshes (elements subsequently converted by CREA_MAILLAGE), with a total of 384 elements. The formulation is linear.
16.3. Tested sizes and results#
The modeling results are tested against the numerical reference solution presented in 2, and also in non-regression.
Location |
Instant |
Component (DEPL) |
VALE_REFE |
Precision |
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
DX |
\(-6.23907\mathit{mm}\) |
2% |
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
DY |
\(7.00031\mathit{mm}\) |
1% |
Identification |
Component |
Reference Type |
Tolerance |
Aen \((\mathrm{48,}\mathrm{60,}0.5)\) node |
DEPL /DX |
|
|
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
|
|
Aen node \((\mathrm{48,}\mathrm{60,}0.5)\) |
|
|
|
Cen \((\mathrm{24,}\mathrm{30,}0)\) node |
DEPL /DX |
|
|
Cen node \((\mathrm{24,}\mathrm{30,}0)\) |
|
|
|
Cen node \((\mathrm{24,}\mathrm{30,}0)\) |
|
|
|