11. Modeling I#
11.1. Characteristics of modeling#
Modeling is AXIS. The contact formulation used is” CONTRAINTE “.
11.2. Characteristics of the mesh#
Knots: 4610
Meshes: 1348 QUAD8, 114 TRIA6
11.3. Tested sizes and results#
Identification |
Reference type |
Reference value |
Tolerance |
\(\mathit{DZ}\) at point \(\mathit{PA4}\) |
“SOURCE_EXTERNE” |
-0.81 \(\mathit{mm}\) |
4.0% |
\(\mathit{DZ}\) at point \(\mathit{PA4}\) |
“NON_REGRESSION” |
||
\(\mathit{FZ}\) on the edge \(\mathit{ENCAST}\) |
“SOURCE_EXTERNE” |
17229.58 \(N\) |
5.0% |
\(\mathit{FZ}\) on the edge \(\mathit{ENCAST}\) |
“NON_REGRESSION” |