10. H modeling#

10.1. Characteristics of modeling#

Modeling is AXIS. The contact formulation used is” CONTRAINTE “.

10.2. Characteristics of the mesh#

Knots: 4610

Meshes: 1348 QUAD8, 114 TRIA6

_images/10000000000004B700000304F3ED532877F1B25E.png

10.3. Tested sizes and results#

Identification

Reference type

Reference value

Tolerance

\(\mathit{DZ}\) at point \(\mathit{PA4}\)

“SOURCE_EXTERNE”

-0.81 \(\mathit{mm}\)

4.0%

\(\mathit{DZ}\) at point \(\mathit{PA4}\)

“NON_REGRESSION”

\(\mathit{FZ}\) on the edge \(\mathit{ENCAST}\)

“SOURCE_EXTERNE”

17229.58 \(N\)

5.0%

\(\mathit{FZ}\) on the edge \(\mathit{ENCAST}\)

“NON_REGRESSION”