9. G modeling#
9.1. Characteristics of modeling#
The modeling is 3D. The contact formulation used is” CONTINUE “.
9.2. Characteristics of the mesh#
Knots: 4465
Meshes: 19389 TETRA4
9.3. Tested sizes and results#
Identification |
Reference type |
Reference value |
Tolerance |
\(\mathit{DZ}\) at point \(\mathit{PA4}\) |
“SOURCE_EXTERNE” |
-0.81 \(\mathit{mm}\) |
4.0% |
\(\mathit{DZ}\) at point \(\mathit{PA4}\) |
“NON_REGRESSION” |
||
\(\mathit{FZ}\) on the edge \(\mathit{ENCAST}\) |
“SOURCE_EXTERNE” |
27064.25 \(N\) |
5.0% |
\(\mathit{FZ}\) on the edge \(\mathit{ENCAST}\) |
“NON_REGRESSION” |