3. Modeling A#
3.1. Characteristics of modeling#
3D (PENTA15, HEXA20)
3.2. Characteristics of the mesh#
Number of knots: |
1937 |
Number of meshes and types: |
160 PENTA15, 160 HEXA20 (and 160 QUAD8) |
3.3. Tested sizes and results#
Identification |
Reference |
tolerance |
Temperature (°C) |
||
z = 0.0 r = .0 (N1:a) |
0.00 |
.00001 |
r = .01 (N17:d) |
0.00 |
.0001 |
z = 0.1 r = .0 (n193) |
4.00 |
|
r = .01 (n209) |
4.00 |
|
z = 0.2 r = .0 (n385) |
4.00 |
|
r = .01 (n401) |
4.00 |
|
z = 0.3 r = .0 (n577) |
24.00 |
|
r = .01 (n593) |
24.00 |
|
z = 0.4 r = .0 (n769) |
56.00 |
|
r = .01 (n785) |
56.00 |
|
z = 0.5 r = .0 (n961) |
100.00 |
|
r = .01 (n977) |
100.00 |
|
z = 0.6 r = .0 (n1153) |
156.00 |
|
r = .01 (n1169) |
156.00 |
|
z = 0.7 r = .0 (n1345) |
224.00 |
|
r = .01 (n1361) |
224.00 |
|
z = 0.8 r = .0 (n1537) |
304.00 |
|
r=.01 (n1553) |
304.00 |
|
z = 0.9 r = .0 (n1729) |
396.00 |
|
r = .01 (n1745) |
396.00 |
|
z = 1.0 r = .0 (N1921:b) |
500.00 |
.00001 |
r=.01 (N1937:c) |
500.00 |
.00001 |
(*: Imposed temperature)
3.4. notes#
Volume heat \(\rho {C}_{P}\) is not a step in this test, but must be declared for*Code_Aster*. We take \(\rho {C}_{P}=1.0J/{m}^{\mathrm{3 }}°C\).
Boundary condition \(\varphi =0.\) is implicit on free edges.