Modeling A
==============


Characteristics of modeling
-----------------------------------

**3D (PENTA15, HEXA20)**


.. image:: images/100000000000023C000000EC017ACAB6D0B934A3.png
    :width: 5.8118in
    :height: 2.7126in


.. _RefImage_100000000000023C000000EC017ACAB6D0B934A3.png:


Characteristics of the mesh
----------------------------


.. csv-table::

    "Number of knots:", "1937"
    "Number of meshes and types:", "160 PENTA15, 160 HEXA20 (and 160 QUAD8)"



Tested sizes and results
------------------------------


.. csv-table::

    "**Identification**", "**Reference**", "**tolerance**"
    "Temperature (°C)", "", ""
    "", "", ""
    "z = 0.0 r = .0 (N1:a)", "0.00", ".00001"
    "r = .01 (N17:d)", "0.00", ".0001"
    "z = 0.1 r = .0 (n193)", "4.00"," 1%"
    "r = .01 (n209)", "4.00"," 1%"
    "z = 0.2 r = .0 (n385)", "4.00"," 1%"
    "r = .01 (n401)", "4.00"," 1%"
    "z = 0.3 r = .0 (n577)", "24.00"," 1%"
    "r = .01 (n593)", "24.00"," 1%"
    "z = 0.4 r = .0 (n769)", "56.00"," 1%"
    "r = .01 (n785)", "56.00"," 1%"
    "z = 0.5 r = .0 (n961)", "100.00"," 1%"
    "r = .01 (n977)", "100.00"," 1%"
    "z = 0.6 r = .0 (n1153)", "156.00"," 1%"
    "r = .01 (n1169)", "156.00"," 1%"
    "z = 0.7 r = .0 (n1345)", "224.00"," 1%"
    "r = .01 (n1361)", "224.00"," 1%"
    "z = 0.8 r = .0 (n1537)", "304.00"," 1%"
    "r=.01 (n1553)", "304.00"," 1%"
    "z = 0.9 r = .0 (n1729)", "396.00"," 1%"
    "r = .01 (n1745)", "396.00"," 1%"
    "z = 1.0 r = .0 (N1921:b)", "500.00", ".00001"
    "r=.01 (N1937:c)", "500.00", ".00001"


(*: Imposed temperature)


notes
---------

Volume heat :math:`\rho {C}_{P}` is not a step in this test, but must be declared for*Code_Aster*. We take :math:`\rho {C}_{P}=1.0J/{m}^{\mathrm{3 }}°C`.

Boundary condition :math:`\varphi =0.` is implicit on free edges.