v4.01.005 TPLA05 - Cylindrical bar with flow density

Summary:

This test is the result of the independent validation of version 3 in linear stationary heat.

It includes two models, the first that tests solid elements, the second, axisymmetric 2D elements.

Boundary conditions in terms of imposed temperature and flux density are taken into account.

The results from this test case are compared with those provided by VPCS.

• 1. Reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
  • 1.4. Initial conditions
• 2. Benchmark solution
  • 2.1. Calculation method used for the reference solution
  • 2.2. Benchmark results
  • 2.3. Uncertainty about the solution
  • 2.4. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Characteristics of the mesh
  • 3.3. Tested sizes and results
  • 3.4. notes
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested sizes and results
  • 4.4. notes
• 5. Summary of results