v3.04.147 RCCM09 - Operator POST_RCCM: calculation of the boot factor

Summary:

This linear static thermo-mechanical test makes it possible to validate the calculation of the initiation factor with the command POST_RCCM (option AMORCAGE, results of type EVOLUTION).

The analytical solution is simple, and allows post-processing to be tested in the sense of RCC_M.

Model A of the test case consists of a set of unit tests, where the constraints are directly provided and not calculated, to verify the correct functioning of the calculation of the priming factor.

Modeling B corresponds to the complete resolution (modeling, calculation of constraints and estimation of priming factors) of a reference problem presented below.

• 1. Model B reference problem
  • 1.1. Geometry
  • 1.2. Material properties
  • 1.3. Boundary conditions and loads
• 2. Benchmark solution
  • 2.1. Benchmark results
  • 2.2. Bibliographical references
• 3. Modeling A
  • 3.1. Characteristics of modeling
  • 3.2. Tested values and results
• 4. B modeling
  • 4.1. Characteristics of modeling
  • 4.2. Characteristics of the mesh
  • 4.3. Tested values and results
• 5. Summary of results