13. M modeling#
13.1. Characteristics of modeling#
The model consists of an eccentric plate of \(0.4m\) (PLAQ1) (compared to the initial mesh). The total thickness is \(\mathrm{0,8}m\). The elements used are Q4GG plate elements with STAT_NON_LINE.
\(A3\)
\(A1\)
0.4
13.2. Characteristics of the mesh#
The mesh is composed of TRIA3 triangles.
13.3. Tested sizes and results#
Identification |
Reference type |
Reference values |
Tolerance |
DEPL DX \(\mathit{A3}\) |
“ANALYTIQUE” |
—2.97625E-05 |
0.005 |
EFGE_NOEU NXX \(\mathit{A1}\) |
“ANALYTIQUE” |
4000 |
1.e-9 |
EFGE_NOEU MXX \(\mathit{A1}\) |
“ANALYTIQUE” |
10000 |
|
EFGE_NOEU QX \(\mathit{A1}\) |
“ANALYTIQUE” |
-1000 |
1.e-9 |
EFGE_ELNO MXX NOEUD \(\mathit{N1}\) MAILLE \(\mathit{M1}\) |
“ANALYTIQUE” |
8400.0 |
|