3. Modeling A#
3.1. Characteristics of modeling#
The model consists of 2 eccentric plates with the distances \(–0.2m\) and \(0.2m\).
The elements used are plate DSQ elements.
PLAQ1
PLAQ2
0.2
0.2
3.2. Characteristics of the mesh#
Z Y
5
10 x
The mesh is regular. We have 10 subdivisions according to \(x\) and 5 subdivisions according to \(y\); for a total of 50 DSQ (QUAD4) meshes and 66 knots.
3.3. Tested sizes and results#
Identification |
Reference type |
Reference values |
Tolerance |
DZ (\(A3\)) |
“ANALYTIQUE” |
—3.9062510—5 |
0.005 |
MXX (\(A1\)) |
“ANALYTIQUE” |
0.001 |
|
QX (\(A1\)) |
“ANALYTIQUE” |
-500. |
0.001 |
SIXX (\(M\mathrm{1,}\mathit{PT}\mathrm{1,}\mathit{SSPT}1\)) |
“ANALYTIQUE” |
1.0E-8 |
|
SIXX (\(M\mathrm{1,}\mathit{PT}\mathrm{1,}\mathit{SSPT}2\)) |
“ANALYTIQUE” |
990.585 |
0.0001 |
Frequency 1st mode |
“NON_REGRESSION” |
18.2 |
0.0001 |
Frequency 2nd mode |
“NON_REGRESSION” |
84.6 |
0.0001 |
Frequency 3rd mode |
“NON_REGRESSION” |
101.21 |
0.0001 |
Frequency 4th mode |
“NON_REGRESSION” |
111.28 |
0.0001 |